Question: Can You Replace Toilet Seat Hinges?

Can a self closing toilet seat be fixed?

Can a soft close toilet seat be fixed.

While the lowering action on most soft-close seats cannot be adjusted, it’s easy to make minor adjustments to the seat hinges if they become loose and the seat comes out of alignment or starts to slide around on top of the bowl..

What are toilet seat bumpers?

The toilet seat bumper is a small plastic piece that provides a buffer between the seat and the toilet itself. The inexpensive replacement product will not only get you to clean your toilet seat, but also it can prevent permanent damage to the toilet.

Can an elongated toilet replace a round toilet?

Elongated — This toilet has a slightly longer, egg-shaped bowl for extra comfort. So, in the past the bad news was that if you wanted to replace a round-front toilet with an elongated, in many cases the longer toilet would not fit the space. … An elongated bowl is approx. two inches longer than a round bowl.

Can I put an elongated toilet seat on a round toilet?

An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.

How often should you replace your toilet seat?

Toilet seats will generally last for 5 or more years. Exactly how long a specific toilet seat will last depends on a number of factors, including the material the toilet seat is made from, the quality of the hardware, and the amount of use it receives.

How do you fix squeaky plastic hinges?

Use paraffin wax as a plastic lubricant instead of oil. Plastic squeaks when two surfaces rub against each other and cause friction. To prevent the squeak, prevent the friction. The simplest way to do this is to insert another, non-squeaky substance into the place where the plastic meets whatever is rubbing on it.

Do all toilet seats fit all toilets?

There are industry standards for toilet seats – all toilets have seat post holes on 5 1/2″ centers – all elongated bowls are 18 1/2″ from seat posts to front of rim, and all round bowls are 16 1/2″. Any manufacturer’s seats will fit any toilet manufacturers bowls if they are standard round or standard elongated.

Are wood or plastic toilet seats better?

Material Toilet seats are typically made of either plastic or wood, and there are pros and cons to each material. Plastic seats tend to be lighter and have a longer lifespan, while wooden seats are sturdy and heavier. Many people also think wooden toilet seats add a touch of luxury to the bathroom.

How do you clean the hinges on a toilet seat?

Close the toilet seat cover. … Combine one part vinegar and two parts baking soda to form a paste. … Scrub the hinge area with the scouring paste, using a soft-bristled brush so you don’t scratch the porcelain or the hinge, which is usually made of plastic. … Rinse the scouring paste off with clear water.More items…

Why does my toilet seat keep sliding?

Toilet seats often wobble because the holes in the toilet-bowl rim are larger than the diameter of the bolts, allowing movement that eventually makes the nuts loose. Tightening the nuts seldom works very well.

How do I stop my toilet seat from squeaking?

There’s an easy fix for your squeaky toilet seat using common household tools.Close the toilet lid. … Find the nuts under the back of the toilet bowl. … Repeat with the second nut and screw. … Squirt a small amount of spray lubricant into the hinges at the back of the toilet seat. … Wipe away excess lubricant with a damp rag.

Why does my toilet screech?

That irritating, high-pitched squealing sound from your toilet is coming from the fill valve. … It might mean that the water pressure in the plumbing system is too high, but more often than not, it’s due to a worn washer in the ballcock assembly.

Are toilet seat hinges universal?

Toilet seat hinges all seem the same, but that is not the case. There are standard sizes of toilet seat hinges, but there are multiple sizes from which to choose. If you have spent the money on an expensive toilet, then you will run the risk that the store will not carry a hinge that is made for that brand.

How do I stop my toilet seat from moving sideways?

Tighten the nut by hand as far as it will go. If it’s metal, continue tightening it with adjustable pliers. The nut will push the washer into the hole, securing the bolt and stopping the seat from slipping.

Are soft close toilet seats any good?

Compared to noisy traditional toilet seats, a soft close seat creates almost no noise, making it a great choice to ensure privacy in your bathroom. The quiet sound of these seats is useful for families with small children who have particular trouble with closing seats properly without losing their grip.

Are wood toilet seats good?

2 – Durability One of the main benefits of wooden toilet seats over plastic is durability. Wooden seats tend to be quite a bit thicker (and heavier) than plastic ones, and as you can expect, are less likely to break. With that being said, you’d have to be pretty rough with a plastic toilet seat to break it.

What are toilet bolts called?

Securing your toilet to the floor are two long bolts (called closet bolts) that come up through the base of the toilet and are secured with nuts.

Why does my soft close toilet seat creak?

Hinges on most new seats are extremely tight. Thus, they may eventually become squeaky. In this case, the lid may loosen up as you close and open it regularly. However, if the squeaking noise annoys, then you shouldn’t wait longer for the noise to stop.

How do I measure for a replacement toilet seat?

Measure the width of the bowl at its widest point. Measure the length of the bowl from between the seat bolts to the outer edge of the front of the bowl. Round bowls should have a length of about 16 1/2 inches and elongated bowls should be 18 to 18 1/2 inches.

How are toilet seats attached?

Most toilet seats are attached to the toilet with fittings held together by two bolts, which are usually hidden by 2 plastic caps at the back of the loo seat itself. Use your flat head screwdriver to remove these protective caps (this may be harder for older seats which have sat there for some time).

Is it OK not to flush pee?

“Urine is normally sterile as a body fluid. Even if you have a urinary tract infection with bacteria in your urine it would be inactivated with the chlorine levels in the public water supply,” he said. “So there’s really no known disease transmission with urine left un-flushed in the toilet.”

What’s the most comfortable toilet seat?

5 Most Comfortable Toilet Seats For Elongated or Round ToiletsNameFeatureRatingBath Royale BR620-00Best All Around5.0Brondell LumaWarmBest Heated4.8MAYFAIR Toilet Seat 830NISLBest Metal Hinges4.7Bemis 800EC 346Best Budget Pick4.71 more row

Are Bemis toilet seats good?

BEST VALUE: Bemis 70 000 Toilet Seat Four bumpers on the bottom of the seat hold it in place during use and prevent unwanted shifting that could damage the hinges. The plastic material is easy to clean and resists any water damage. There isn’t a toilet seat better for the price.

Are wooden toilet seats sanitary?

Wood is also a more porous material than plastic, which can make wooden toilet seats more difficult to clean and, therefore, less hygienic.