- How do you hang a curtain rod without studs?
- Where should curtain rod brackets be placed?
- How far apart are wall studs?
- What are the studs around a window called?
- How much weight can drywall hold with anchors?
- How far should a curtain rod extend past window?
- Can you mount a TV on a wall without studs?
- How much weight can drywall hold without a stud?
- Is it safe to mount a TV with drywall anchors?
- How many pounds can a curtain rod hold?
- Can you hang curtains on drywall?
- How far apart are studs in old houses?
How do you hang a curtain rod without studs?
If there IS a stud, you will just use a screw.
If there IS NOT a stud, you will use a drywall anchor and a screw.
The anchors are the white pieces in the below photo: Knowing which to use is very important — without a drywall anchor, a screw alone will not hold the weight of the curtain and rod..
Where should curtain rod brackets be placed?
Each bracket should be placed at the height you previously determined and about four to six inches from the side of the window frame. (This will allow you to open the curtains completely.) Check to make sure your pencil marks are level otherwise the entire window treatment will be crooked.
How far apart are wall studs?
16 inchesThe general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.
What are the studs around a window called?
Find Wall Studs Above and Below Doors and Windows Above windows and doors are doubled-up studs called headers. Sometimes, these are two-by-six studs turned on edge. Below a window opening, there is also a horizontal sill plate. Both the header and sill plate can be used for attaching items to the wall.
How much weight can drywall hold with anchors?
Toggles, anchors or molly bolts are surprisingly strong. A 1/8 toggle can hold 30 pounds on 1/2-inch drywall and a 3/8-inch toggle can handle a hefty 50 pounds or more safely. When applying any kind of drywall anchor, you should understand how they work and which screw anchor may work best to put into a hollow wall.
How far should a curtain rod extend past window?
When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side, which allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.
Can you mount a TV on a wall without studs?
You can mount a TV without studs using anchors, toggle anchors, mounting plates, ceiling mounts, and other mounting options.
How much weight can drywall hold without a stud?
How much weight can drywall hold without anchors? This can be 5 to 10 pounds, but keep in mind that the drywall is an extremely brittle material and, it is not strong enough to hold the weight for a longer period of time.
Is it safe to mount a TV with drywall anchors?
Use a toggle: If there simply aren’t any studs where you want to mount the TV, then you need to use some sort of hollow wall anchor. … Mounting a TV on drywall or plaster without attaching to a stud can be a very safe and reliable solution IF you know the limits of the wall and the toggles.
How many pounds can a curtain rod hold?
Divide the weight by the required rod width to get the amount of weight per foot and choose a rod, based on the manufacturer’s information, that will accommodate this weight. For example, if the curtains weigh 50 pounds, and the required rod width is 12 feet, the rod must hold just over 4 pounds per foot.
Can you hang curtains on drywall?
You’ll need to use plastic wall anchors to provide proper support if you’re installing in drywall. Fasten the brackets to the walls using your drill or screwdriver. … Hang the curtains and double-check to make sure your brackets are still secure.
How far apart are studs in old houses?
You may be asking, “How far apart are studs?” Typical stud spacing is 16 inches on center and even on older houses is rarely greater than 24 inches on center. Most electrical boxes for switches or outlets are attached to a stud on one side. There are studs on either side of a window.