Question: Do I Need Wall Anchors For Curtain Rods?

Can you hang curtains without anchors?

Knowing which to use is very important — without a drywall anchor, a screw alone will not hold the weight of the curtain and rod.

And if you try and use a drywall anchor in a stud, you’re just in for a world of frustration.

Two of our three brackets went into studs.

If you have dry wall, you’ll have to use an anchor..

How far should a curtain rod extend past window?

When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side, which allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.

Do curtain rods go on trim or wall?

Generally, hanging curtain brackets on the wall above and outside the window molding looks best, since it allows fabric to fall gracefully. If you have detailed window frames you don’t want to cover, an inside mount (hanging curtains within the frame, as you would with a tension rod) can work.

How high should your curtain rod be?

4-6 inchesDO Hang High The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.

Can I use Velcro to hang curtains?

Whether you use larger hooks to hold up rods or smaller hooks to hold up curtains with clips, these are a practical and easily removable solution. … I use Velcro to hang curtains all the time. Seriously! The double-sided adhesive Velcro is so strong that it is perfect for hanging valences and other tailored treatments.

How much weight can command strips hold?

The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.

Where should curtain rod brackets be placed?

Each bracket should be placed at the height you previously determined and about four to six inches from the side of the window frame. (This will allow you to open the curtains completely.) Check to make sure your pencil marks are level otherwise the entire window treatment will be crooked.

Will command strips hold a curtain rod?

Many landlords don’t allow renters to drill holes into walls, which is necessary for installing curtain rod hooks. Fortunately, it is still possible to install curtain rods with Command hooks.

How do you hang a curtain rod without drilling holes?

Coat Hooks To install them, intersperse the coat hooks at an even distance across the window. Loop the holes through each hook to hang your curtains. Coat hooks are easier to hang than traditional curtain rod hardware and don’t require drilling.

How much weight can curtain rods hold?

Divide the weight by the required rod width to get the amount of weight per foot and choose a rod, based on the manufacturer’s information, that will accommodate this weight. For example, if the curtains weigh 50 pounds, and the required rod width is 12 feet, the rod must hold just over 4 pounds per foot.