Question: How Much Smaller Should Blinds Be Than The Window?

Where do you hang blinds in a deep window?

You can either mount your blinds inside or outside of the casing.

Hanging the blinds outside means your window look bigger but when you hang your blinds inside, your window looks slimmer.

When you need to mount your blinds outside, measure along the outside edges of the casing that surrounds the window..

How do you measure a window for blinds at Home Depot?

Inside mount: Measure height at left, middle, and right of window. Write down the longest measurement (round down to an even 1/8″). … OUTSIDE. MOUNT. … Inside mount: Measure width at top, middle, and bottom of window. Write down the narrowest measurement (round down to an even 1/8″). … Wood Blinds. Wood Alternative. … ❑ INSIDE.

What are standard blind sizes?

Custom or Standard: Which Window Blinds Do You Need?Double Hung Window: Standard lengths vary from 36 to 72 inches, and standard widths extend from 24 to 48 inches.Picture Window: Standard heights range from 2 to 8 feet, and standard widths are 2, 3, 4, 5, 6 and 8 feet.More items…•

Do you fit blinds inside or outside window?

In summary, for Venetian, roller and vertical blinds, we would recommend they be hung from within the recess. However, Roman blinds would be better suited outside the recess, as they are able to let more light enter into the room.

How should blinds fit a window?

To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top and the bottom by at least 3″.

How deep does a window need to be for inside mount blinds?

3⁄4″3⁄4″ is the minimum depth required for inside mount blinds.

How do I know what size blinds to buy?

Measuring for Horizontal BlindsMeasure exact window width at top, middle, and bottom.Use the narrowest width. Do not make any deductions – provide the exact measurements of the narrowest width. … Measure exact window height at left, middle, and right side.Use longest height.

Do blinds go inside or outside window frame?

Outside-mounted blinds or shades are mounted on the wall outside the window frame, on the window trim or even on the ceiling above the window. Outside mounted window coverings may be right for your home if: You want to block more light. Outside mounts cover the entire window.

Which is better inside or outside mount blinds?

If you’re installing blackout window treatments to block unwanted light, then you should use outside mount blinds. Mounting blinds outside the window frame will give you more light coverage than blinds that hang from the inside.

How much narrower should blinds be?

Not Adding Width To Outside Mount Blinds We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.

How do you measure for window pull down blinds?

How to Measure for Inside Mount Roller ShadesMeasure the depth of your window frame, from the front of the opening to the glass. … Measure the width of each window. … Measure the height of your window opening in three places: left, center, and right. … Order at the exact opening size with no deductions.More items…

Should blinds be flush with window?

1. Measuring window frame for accurate blinds fitting. … 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.

Can you install blinds yourself?

But here’s the good news: you can install blinds or shades on your own. And no, contrary to what you might hear at other stores, you don’t need to have someone experienced do it for you. You don’t even need experience yourself.

How much should I deduct for interior mount blinds?

When you specify inside mount, we will make a size deduction to allow for operating clearance. We will deduct up to 1/4″ from each side (on vertical blinds there is also a height deduction of 1/4″). The deductions are made so that the blind will not rub or scratch your window frame.